Automated tire recycling EPT/tyre shredEPTEPT

Tire debeader

The 1st action in tire recycling procession
Weighty obligation human body
Hooks and cross pulling die made of 45# metal, tempered and quenched
Equipped with protection body avoiding the risks during doing work
Two series: Hydraulic 1 and mechanic one particular
Straightforward to function and adjust spare elements (hooks and cross pulling die)
Tire cutter

Slicing tires into parts ahead of shredding
Little tire pieces are less difficult to approach in shredder
Knives created of YG-20 steel, EPT utilizing time
Hydraulic control
One clamping cylinEPTand one reducing cylinder
Equipped with a roller platform to approach big tires
Tire shredder

The substantial-potential shredEPTwas EPTly deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for direct measurement reduction of tires into cleanly cut tire chips, dimension 50×50 mm. Slicing shafts for the manufacturing of larger tire chips are offered substantial torque at minimal velocity cut even the strongest tires into parts.
All construction attributes are created for continuous operation in orEPTto obtain optimum throughput charges at cheapest costs.
Very exact tolerances amongst the cutting knives generate cleanly cut tire chips at reduced strength intake.
The slicing knives produced of large top quality alloy steel can be re-sharpened and reused which boosts the service existence and reduces the functioning fees.
The total cutting chamber is lined with tough wear plates.
Large doorways permit for easy accessibility into the reducing chamber.
Tire cracker

The shear in between the two rollers will make tire chips into powders as properly loosen rubbers, steels and textiles
Roller entire body manufactured of solid metal
Surface area of roller made of alloy metal, welded when worn out
A single flat surface area roller and 1 teethed roller, large throughput of powders
Bottom created of solid iron
Crisis stop when overload
Length amongst the two rollers can be modified.
Difficult equipment EPT
Geared up with screening EPT, magnetic separator and fiber separator, ninety nine% purified rubbers will be got.
Finals: eight-30 mesh
Magnetic separator

Final Solution(five-a hundred and twenty mesh tyre powder), As picture:
The same time, Tyre powEPTis widely use in many sector. It can make rubber tile, reclaimed rubber, car part Ect other folks.

2-Reclaimed rubber Producing Line From Tyre Powder:

one. Dynamic desulfurization tank (one sets

Merchandise Name
Dynamic desulfurization tank
Product requirements

two. Open miXiHu (West Lake) Dis.ng mill (you need two-3 sets)

one. Diameter of roller: 450mm

2. Operating length of roller: 1200mm

three. Speed of front roller: 24.26m/min

four. Friction ration of two rollers: 1: 1.27

five. Max hole: 15mm

six. Capacity: 25-50kgs

7. Wieght: 2000kgs

eight. Motor EPT: 55KW

9. Dimension: 6150*2280*2000mm

3. Rubber refiner( one sets)

1. Front rolle diameter: 480mm (drum )

2. Rear roller diameter: 612mm (drum)

three. Operating length of roller: 800 mm

four. Front roller linear velocity: 22.97m/min

5. Velocity ratio of two rollers(front/rear): 1: 1.82

six. MAX Gap: 15mm

seven. Motor EPT: 55KW

eight. Dimension: 4700*2100*1480mm

Final EPT(RECLAIMED EPT):

No	Name	model	amount	EPT
EPT tire pre-processing , you will get lt fifty*50MM rubber crumb
1	Single hook debeader	LS-1200	1	eleven KW
two	EPT tyre cutter	WTC-a hundred and twenty	1	5.5 KW
three/four	EPT tyre shredder( with EPT tyre conveyor)	ZPS900	1	61.five KW
Rubber powder processing: you will get three-eight MM rubber powder,at the same time, independent the fiber and metal wire
five	Tyre crusher	XK560	one	75 KW
6	Huge conveyor products	BCL-eight	2	two KW
7	Tiny conveyor products	BCL-three	one	1.1 KW
eight	Massive Magnet separator	BMS22	1	2.two KW
nine	Small Magnet separator	SMS-one	one	one.one KW
10	Huge Shaking display screen	BSS-8	1	7.5 KW
11	Modest Shaking monitor	SSS-3	1	three KW
12	Fiber separator	FS110	1	eleven KW
13	Fine grinder	XMF420	1	32.4 kw
14	Circle shaking display screen	DIA600	one	two.two kw